Vujasinovic & Beckcom Blog

Jones Act Cases

3/23/2008
Brian Beckcom
Comments (0)
Preventing offshore slip and fall injuries by using non-slip coatings on walking and working surfaces
Any ship, rig, barge, or boat owner who doesn't use non-skid or non-slip coatings or surfaces whether workers walking (any walking or working surface) is not living up to his responsibility to protect workers on the vessel from injury.

Maritime work can be some of the most rewarding types of employment you can find, both personally and financially.  Maritime work can involve working on a jack-up oil rig in the Gulf of Mexico, a transport vessel plying the open oceans,  working barges in the intercoastal waterways or Mississippi River, or anything else involving working on the rivers or open seas. But maritime work can be hazardous if the ship or barge owners do not take proper precautions to protect employee safety.

One of the more common causes of injuries on boats, barges, offshore oil rigs, and other floating vessels involves slips and falls. 

Since maritime work necessarily involves working over, near, in, or around water, the walking and working surfaces get wet.  And that means slippery conditions.  Plus, the stairways and ladders on boats and rigs are often in tight quarters and very steep, making them even more potentially dangerous.

Slips and falls can result in extremely serious injuries.  Broken bones, back and neck injuries, knee, shoulder or elbow injuries, and even serious head injuries can result from slips and falls.

How do you protect yourself?

First, always try to be aware of where you are working and walking.  Keep floors and other walking and working surfaces free of debris, water, grease and other slippery substances.  Clean up spills as soon as they occur.

More important, perhaps, the captain or vessel owner should ensure that all walking and working surfaces are coated with some sort of non-slip or non-skid materials.  Anyone who works offshore knows that it is impossible to keep the surfaces clean of debris or slippery substances 100% of the time.  That's why it's so important for the shipowners to coat the walking surfaces with non-slip materials.

Any ship or vessel owner who doesn't maintain properly non-slip walking or working surfaces is not keeping the vessel properly maintained and could be liable under the Jones Act to any worker who is injured as a result.


Read More about "Preventing offshore slip and fall injuries by using non-slip coatings on walking and working surfaces"


Labels:

Comments

Post a comment

Post a Comment to "Preventing offshore slip and fall injuries by using non-slip coatings on walking and working surfaces"

Vujasinovic & Beckcom P.L.L.C
1001 Texas Avenue, Suite 1020
Houston, TX 77002

Phone: 713.224.7800
Fax: 713.224.7801